I have tried many similar tree tumors to improve the stability of wood. There have been successful and failed. Because thermosetting acrylate is an oily resin, if the internal pores of your wood are very small, it is not conducive to the resin absorption. If the wood itself contains a lot of vegetable oil, it is not suitable. If your wood contains a lot of moisture inside it will also affect the wood's absorption of resin. (Recommended moisture is less than 1%) Maple, birch, buckeyes, I think it is very suitable for stability enhancement, of course, you can also try other woods.
A layer of magnet with a thickness of only 0.6mm is added between the mobile phone protective case and the resin sheet. It has a very magnetic force. This magnet circle ensures that the wireless charging sensor can be firmly attached to the back of the mobile phone case, making wireless charging more Stablize.
There is nothing pretty about this step. Except the slow, and I do mean slow, reveal of your beautiful creation. Nothing fancy just get started. I recommend starting with 40 grit sandpaper, followed by 80 and 120,240,400,800.This will result in an amazingly clear look. Pro Tip: If you have the time and the means to, or already have lots of sandpaper and sanding pads. I have done a 800, 1000, 2000, 3000, 5000, 8000 progression before and maybe it was just my mind playing tricks on me, but it looked phenomenal.
Dry the wood! The number one thing keeping you from stabilizing better is wet wood. Listen, I get it. Why do you think I am going to great lengths to convince you of this point? I’m doing my best to speak from experience, and help you avoid all the mistakes I made. Okay, so you think you are hearing me now. That’s good! You know you need dry wood, but how? Now you are asking the right questions. With a heart full of commitment to dry the wood no matter how long it takes. Let’s begin. You are going to need an oven of some kind. At Carved, we have graduated from the recommended starter toaster oven. But believe me,...
The inability to prevent damp deformation is the characteristic of wood. A thin layer of wood is attached to the back of the phone case. In order to ensure that the wood will not be deformed and cracked due to moisture or heat, we have improved the stability of the wood.After splashing water on the phone case and under strong sunlight, the wood did not deform or crack after 2 hours.